ABC SwissTech has developed a wide range of (abrasive or polishing chips).

Even more than the equipment that define the movement between parts and abrasives, chips correspond to the tools in operations of mass finishing and their correct choice is essential to obtain a successful result.

Whether they are intended for deburring operations or polishing, abrasive chips are characterized by :

A base or binder

Mineral for ceramic or porcelain, polyester for plastics, or metal (copper, stainless steel, steel…).

An abrasive filler

Aluminium oxide, Silicium oxide, Silicon carbide, Silicium oxide, Boron carbide, Boron nitride, Diamond micro-powders (Monocrystalline or polycrystalline)…

Shape and dimensions

Their shape and dimensions defined by the workpieces ( straight or angle cut cylinder, triangle, ellipse, cone, pyramid, tristar, ball, Paraboloid, star, wedge…)

Media

They are chosen based on:

– The desired objective (deburring, polishing, edge radiusing, glossing, matte effect, etc.) and the material of the parts which define the grade of the media (more or less abrasive, or polishing)

– The size and morphology of the parts define the shape and dimensions of the media

Additives

They are chosen based on:

– Application (deburring, polishing, brightening, matte effect, degreasing, passivation, etc.)

– The composition of the parts to be treated

– The type of equipment used

– The type of effluent treatment

Pastes

Pastes allow you to speed up processes or work dry.

They also make it possible to maintain in suspension in the vibrators certain active products which would tend by gravity to remain at the bottom of the vibrating bowl.

We have a range of more than 6500 media; each month, we develop about 10 new products.

Do you know technical caracteristics of the chips you use ?

Are you sure that you use the best suited to your needs chips ?

(optimization of the obtained surfaces quality, best deburring, optimisation of the cycle time of your processes, the wear your chips… we can help)